The cheapest work we do and the work people mention most afterwards. Pull-outs, corner solutions, soft-close runners and handles that suit your hands rather than the photograph they appeared in.
A deep base cupboard is a dark box with things lost at the back of it. Put the same volume on runners and it becomes a drawer you can see into, which is the single biggest usable-storage gain available without changing a cabinet.
Corners are the other one. A blind corner swallows perhaps half its volume in most kitchens, because the problem there is reach rather than space, and a carousel or a pull-out mechanism brings the back of the cupboard out to where your hands already are instead of leaving you kneeling on the floor with a torch.
Neither of those needs the kitchen replaced, and both fit cabinets you already own. That is why this is often the first thing we suggest to someone who likes their kitchen but finds it irritating to use every day. See pull-outs, corner units and drawer organisation.
Recent work
What to expect
A Spruce Grove Upgrade, Step by Step
Measure the openings
Internal width, depth and any hinge or frame intrusion. Runners need real clearance, and a mechanism ordered to the door size rather than the opening will not go in.
Match parts to the cabinet
Frameless and face-framed cabinets take different hardware, and older boxes sometimes need packing. This is checked before anything is ordered, not on fitting day.
Try the handles
We bring samples so you can hold them. A pull that photographs beautifully and catches a pocket every morning is the wrong pull for that kitchen.
Fit and adjust
Runners levelled, soft-close set, doors realigned afterwards. The adjustment at the end is what makes the difference between fitted and properly fitted.
Hardware matters
Hinges and Runners Get Used Constantly
A kitchen drawer is opened several times a day for twenty years, and the runner under it is the part that decides whether the kitchen feels solid or tired. Soft-close is the upgrade people mention unprompted afterwards, and it is far cheaper to specify now than to retrofit later.
Handles are the other thing your hands meet constantly, which is why we bring samples rather than a catalogue. Size, projection and edge shape matter more than finish once you actually hold one, and the right choice is usually obvious in about ten seconds.
Both are worth doing while the doors are already off for other work, because the labour is largely shared and doing them as a separate visit later costs more for exactly the same result. See soft-close, knobs and pulls and storage accessories.
Details
Storage work
Storage and Hardware in Spruce Grove
Most of it fits cabinets you already own, in hours rather than weeks.
What fits existing cabinets, what it costs and how long it takes.
Usually yes. We measure the internal opening rather than the door, check for hinge or frame intrusion, and confirm the box is sound enough to carry a loaded runner.
Hours to a couple of days for most storage and hardware work, because nothing is being rebuilt. It is the least disruptive thing we do.
On drawers particularly, yes, though it costs more later than specifying it during other work. If doors are coming off anyway, that is the moment.
A carousel or a pull-out mechanism that brings the back of the cupboard out to you. Shelving alone does not, because the problem is reach rather than volume.
Yes, and we bring samples so you can hold them before ordering. Projection and edge shape decide whether a pull catches pockets, and a photograph cannot tell you that.
Often, with packing. Frameless and face-framed boxes take different parts, so we check what you have before ordering rather than discovering it on fitting day.
Yes. Plenty of people do storage and hardware without touching anything else, and it is the cheapest meaningful improvement to a kitchen you otherwise like.
